products
 
Technical Data
 
ADIACTIVE 'M' DYES

They are applicable on cellulosic materials by variuos following printing and dyeing methods :

 
(A) Printing Methods :

(i) Print
(dye with alkali)
  - Dry - Steam - Wash - Dry
(ii) Print
(dye with alkali)
  - Dry - Bake - Wash - Dry
(iii) Print
(dye without alkali)
- Dry - Nip pad
(with alkali)
- Dry - Wash - Dry
(iv) Pad
(with alkali)
- Dry - Print
(dye without alkali)
- Hang - Wash - Dry
(v) Print
(dye without alkali)
- Dry - Pad
(Sodium Silicate)
- Batch - Wash - Dry
 
(B) Dyeing Methods :

(1) Exhaust dyeing method : (Jigger, Winch Machines, Package dyeing machines etc.)
 
(2) Pad - dyeing method : (Padding Mangles).
 
(a) Pad
(dye & Soda ash)
- batch
2 hrs.
- Wash -
(b) Pad
(dye & Soda bi carb + Soda ash)
- Batch
16-24 hrs.
- Wash -
(c) Pad
(dye & Bicarbonate)
- Dry
1-24 min. hot flue
- Wash -
(d) Pad
(dye & Bicarbonate)
- Dry - Steam - Wash
 
The illustrated shades of Adiactive 'M' Dyes in this shade card are dyed by exhaust dyeing method.
 
Dyeing Procedure :
 

Set the dyebath at 30 ºC temperature. Add half amount of dye solution and carry out dyeing for 5-10 minutes. Add remaining half amount and continue dyeing for further 5-10 minutes. Now add half amount of required salt and continue dyeing for 15 minutes. Add remaining half salt and continue dyeing for further 15 minutes.

Now add half amount of Soda ash solution and carry out dyeing for 15 minutes. Then add remaining half amount of Soda ash and continue dyeing for 40 to 45 minutes. Then wash with cold and hot water. Soap at boil for 20 minutes and cold rinse and dry.

 
Depth of Shade Salt gms /l Soda ash gms /l
Below 0.5 % 30 3
0.5 % - 2.0 % 40 4
2.0 % - 4.0 % 50 7
 
Technical Data
 
ADIACTIVE 'H' DYES

They are applicable on cellulosic materials by variuos following printing and dyeing methods :

 
(A) Printing Methods :

(i) Print
(dye with alkali)
  - Dry - Steam - Wash - Dry
(ii) Print
(dye with alkali)
  - Dry - Bake - Wash - Dry
(iii) Print
(dye without alkali)
- Dry - Pad
(sodium silicate)
- Batch - Wash - Dry
 
(B) Dyeing Methods :
 
(i) Exhaust dyeing : (Jigger, Winch Machines, Package dyeing machines etc.)
 
(ii) Pad - Dyeing method : (Padding Mangles).
 
(a) Pad - Dry - Bake - Wash    
(b) Pad - Dry - Steam - Wash    
(c) Pad - Dry - Chemical Pad - Dry - Steam - Wash
(d) Pad - Batch - Wash - Dry    
 
The illustrated shades of Adiactive 'H' Dyes in this shade card are printed with Print - Dry - Steam method.
 
Printing Process   Reduction
 
Adiactive 'H' Dye 5-70 -
Urea 50-100 100
Water 505-420 475
Sodium Alignate 4% 400 400
Resist Salt 10 10
Sodium Bicarbonate 15-30 15

Total 1000 1000
 
Print the cloth with above print paste and dry. The dried goods are then steamed for 15-20 mts. on star ager and then washed.
 
Technical Data
 
ADIACTIVE 'HE' DYES

Adiactive 'HE' dyes are specially designed only for applicable by exhaust dyeing methods. The various methods are as under :

 
(A) (Winch, Jet, Package and beam dyeing)
 
  (i)

Salt addition in portions :
This method is recommanded for non-circulating liquor machines.

 
  (ii)

Salt addition at start :
This method is recommanded for machines with liquor circulation.

 
  (iii)

Salt and at alkali addition at start :
This method is recommanded for machines with liquor circulations for unmercerised cotton.

 
  (iv)

Isothermal Method :

 
(B) Exhaust dyeing with jigger machines.
 
(C) Exhaust dyeing at cotton-polyester blend by one bath two stage method.
 
(D) Garment dyeing with Rotary drum machines.

The illustrated shades of Adiactive 'HE' dyes in this shade card are dyed by following method.

 

Dyeing Method :

The dyebath is set at 40 ºC with dye solution and cerry out dyeing for 10 min. Add half amount of salt and raise temperature to 60 ºC in 15 mts. Then add remaining half amount of salt and raise temperature to 80-85 ºc in further 15 mts. continue dyeing for more 15 mts. at same temperature. Now add a half amount of Soda ash and continue dyeing at 80-85 ºC for 15 mts. then add remaining half amount of Soda ash and continue dyeing at same temperature for further 45-60 mts. and wash.

 
Salt & Alkali requirements : M : L : R : : 1 : 20
 
Depth od Shade Salt gms /l Soda ash gms /l
Below 0.5 % 30 10
0.5 % - 1.0 % 45 15
1.0 % - 2.0 % 60 15
2.0 % - 4.0 % 70 20
 
 
 
Go Top E-mail

Bullet Home Bullet Profile Bullet Products Bullet Quality Bullet Feedback Bullet E-mail

Site designed & hosted by Wizz O Tech, reachgujarat.com